Yearly Archives: 2014

OsX Network Time Server | YOSEMITE

Setting up Time servers on Os X (servers) for the Os X clients of your network. time.euro.apple.com as the source ntp Server. Make sure your DNS are Ok and if needed Add Aliases records On the Servers you want to

Posted in Admin, Mac, tips tricks scripts Tagged with: , , , , ,

Changing Services Settings in Yosemite Server

With Os X Server you can move the Service data. Launch Server.app, then in the Settings pane you can edit the service Data by Clicking the Edit… button. But it’s all or nothing from the GUI. If like me you’d

Posted in Admin, Mac, tips tricks scripts Tagged with: , , , , , , ,

SFOTT | YOSEMITE beta release

EDIT 20141118 : Update runs fine from AppStore with 10.10.1 seeded today. I am very very very late at coding Sfott, I have focused on Yosemite Server for my job lately. I’ll do my best to go further and at

Posted in sfott Tagged with: , , , , , , , , , , , , , , ,

SFOTT | YOSEMITE : success

sfott_icon

Thanks to macrumors great people, I too, succeeded to install YOSEMITE (on my MacMini2,1) I do not have anymore MacPro1,1 at hand to test on it. But if a MacMini2,1 takes it, no worries Macpro1,1 & 2,1 will do has

Posted in sfott Tagged with: , , , , , , , , , , , , , ,

Setup VLANs between RV220W router and SG200-26 Switch (CISCO)

CiscoLogo

This is what I did to Set up VLANS Between a RV220W Router and SG200-26 Switch (both CISCO) This should be the same for any SG200-xx switch. I had lots of trouble getting it to work (because I did not

Posted in Admin Tagged with: , , , ,

Updating CISCO SG200-26 Firmware

CiscoLogo

I’ve got a Cisco SG200-26 switch, and it has a Firmware Version (Active Image): 1.3.0.62 and Boot Version: 1.1.0.6 I tried to update the (latest) firmware sx200_fw-14088.ros via http, and … it failed, stating there was an ‘error “illegal software

Posted in Admin Tagged with: , , , , , ,

10.9.5 Update and SFOTT | All smooth but BEWARE (again)

sfott_icon

10.9.5 Update runs smooth. No need to repatch the System once done, like for the previous 10.9.3 / 10.9.4 I’ve just downloaded and installed the 10.9.5 Update on my Guinea MacMini2,1 with no hassle. Note I do not have access

Posted in sfott Tagged with: , , , , , , , , , , , , , , ,

Turn a hardware specific MacMini Os X Server 10.6 install media to a non-specific hardware Install media to create a VM

10.6_ServerVM_Installscreen

Install Os X Server 10.6 VM with an original Mac Mini Server install DVD on a (10.8.5) MacPro and Parallels 7 My 10.6 Server Install DVD was shipped with my MacMini4,1 Server. So it fails to install a VM with Parallels

Posted in Admin, Mac, tips tricks scripts Tagged with: , , , , , , , ,

Renew the Code Signing Certificate on Os X Server 10.8.x

CertStackLarge2x

Server app warns me I have to renew the code signing certificate soon. It tells me everyday. It will do so until I do renew it…but nothing happens when I clic in the Server GUI…. Ok according to this Apple

Posted in Admin, Mac, tips tricks scripts Tagged with: , , , , , , , , ,

Install ESXi 5.5 on MacPro3,1 with dead onboard Ethernet and a Marvel 88E8053 PCI card.

VSphere

So this is the follow up of this post : http://oemden.com/?p=1222 My MacPro3,1 is a recovered MacPro that had been thunderstruck – yeah you read well and the motherboard NIC chips have died ( the Graphic Card has died too but not

Posted in Admin, Mac, tips tricks scripts, Windows Tagged with: , , , , ,